+TheHarvesters Posted March 1, 2011 Share Posted March 1, 2011 (edited) Hi all. I have been developing a cart which requires me to use the CurrentDistance property, which I believe is not yet available from all players. In another forum (Earwigo) Shawn (the PiGo developer) has offered to add this feature in a future version (Thanks Shawn!) This cart is an opportunity to test the CurrentDistance property (plus a few other properties) to see if different player applications support them. < Click here for the Cart > So far I have tested the cart in the emulator and with my Oregon 300. As you might expect, they both work. I would be grateful if you have access to a different player that you would have a go at running the cart to see if it displays correctly or crashes. It is a simple play-anywhere cart which just constantly displays updates to a distance from target zone, along with a few other items. Thankyou for listening! Paul. Edited March 1, 2011 by TheHarvesters Quote Link to comment
Memme Posted March 24, 2011 Share Posted March 24, 2011 I tried the cartridge on my Garmin nuvi 500 from Stockholm, Sweden. It gives a distance to target of about 5,056,000 ft and bearing 241 degrees. Position is said to be N59.323 W18.128 which is not correct as I live at East 18.128. When I press the Answer button only a quick flash of the Locations YouSee etc. page is shown. When I press and hold ArrowDown the altitude and accuracy is shown. To leave the cartridge I have to power down. So it doesn't work well on my nuvi. Quote Link to comment
+TheHarvesters Posted March 27, 2011 Author Share Posted March 27, 2011 Thankyou Tadpole, for your response. That's odd! 8( I have a Nuvi myself so will try this out, but I would expect you to have a nearer target zone than that - it seems that the location was well off though - could it be that the accuracy was poor - did you let the unit settle before starting, so it knew where it was? Also there should be a stop button you can press to exit the constant screen updates. That would allow you to then exit the cartridge normally. thanks again, Paul. Quote Link to comment
+Nuggie99 Posted April 8, 2011 Share Posted April 8, 2011 (edited) I had a similar experience on the iphone. If I hit location or inventory this screen pops back up. When I hit Locations, the page with the pointer and distnace pops up, then the screen below pops up again. Hope this helps. If you have further questions, let me know. I figured putting a a picture of my home coordinates might not be the smartest thing to do. Edited April 8, 2011 by Nuggie99 Quote Link to comment
+TheHarvesters Posted April 10, 2011 Author Share Posted April 10, 2011 Thanks Nuggie99, so this pop-up still occurs even after you hit the stop button? To be clear the continue button is designed to do just that - i.e. keep updating that message and showing it at 1 sec intervals. The stop button should stop it until you restart it by going to the inventory and selecting it to start again. cheers! Paul. Quote Link to comment
+Master Mariner Posted April 18, 2011 Share Posted April 18, 2011 Hi Paul This works fine on my Oregon 550t. Master Mariner Quote Link to comment
georgecombey Posted April 18, 2011 Share Posted April 18, 2011 Anyone, got the problem fixed without having to restart? Quote Link to comment
+dfx Posted April 18, 2011 Share Posted April 18, 2011 The Android WhereYouGo player instantly dies with an exception. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.