+KarateNeko2 Posted March 19, 2017 Share Posted March 19, 2017 Hello, I don't post much but suddenly I'm having an issue with my Garmin etrex 20. When I plug it in, it turns on instead of going to the screen that allows it to connect to the computer. Any advice? I loaded waypoints to it yesterday just fine without it turning on, but now it won't do it. I tried reseting and it didn't do anything... Odd. Any advice is appreciated!!! -KN2 Quote Link to comment
+Red90 Posted March 19, 2017 Share Posted March 19, 2017 In the settings. Look for "USB Mode". Change the setting to "Mass storage". See here: http://www.aukadia.net/gps/lw3_0.htm Quote Link to comment
+Hunting_Phoenix Posted April 2, 2017 Share Posted April 2, 2017 Hopefully you figured this out. It could also be a cable thing, if you used a different cable. I have (had?) one charge only USB cable, and my unit would do the same when I accidentally grabbed it. Switching cables to a standard cable fixed the problem. Quote Link to comment
+KarateNeko2 Posted April 3, 2017 Author Share Posted April 3, 2017 Thank you for the replies!!! I forgot about my post as I resolved the problem. It turns out it was my computer. I restarted it and everything worked normally... Odd!!! Thanks again- KN2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.