+CaptainHerb Posted July 31, 2014 Share Posted July 31, 2014 When I turn on my Oregon 450 with the card installed, the screen will not progress beyond "Loading photos". I have no photos on the card, just maps. Reformatted the card but it still hangs up. Any suggestions? Quote Link to comment
+hankpixie Posted August 7, 2014 Share Posted August 7, 2014 Is the card formatted in FAT32? Try booting without the card then reinstall the card and boot up. I occasionally have issues with booting up after I've loaded PQ's onto the card. I've done everything from a hard reset to wiping the card clean and reinstalling the Pocket Queries back onto the card. Also run a software update with the webupdater. Here's a link to a wiki page with Oregon info: http://garminoregon.wikispaces.com/Geocaching Quote Link to comment
+phlatlander Posted August 8, 2014 Share Posted August 8, 2014 Hankpixie offers good advice: "Try booting without the card then reinstall the card and boot up." If the unit still does not start normally then I would turn if off (remove the batteries if necessary), remove the card, then do a hard reset. When the unit is running, turn it off, insert the card and re-start. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.