+vadeko Posted April 21, 2014 Share Posted April 21, 2014 (edited) Hallo, sinds enige jaren gebruik ik gsak naar volle tevredenheid. Gsak is ook geupdated van 7 versie naar versie 8..... . Omdat mijn laptop steeds trager wordt wil gsak installeren op mij n pc. In een topic heb ik gelezen dat dit mag en kan. Voor het aanmelden en registreren heb ik echter alleen de beschikking over de licentie code van gsak versie 7 en om deze te updaten moet ik een versie 8 aanvragen en hiervoor opnieuw betalen. Kan iemand mij vertellen of dit klopt,of waar ik de code kan vinden voor versie 8.... . Bij voorbaat dank, Henk Edited April 21, 2014 by vadeko Quote Link to comment
+StefandD Posted April 22, 2014 Share Posted April 22, 2014 Je zou bij het updaten van 7 naar 8 een mail gehad moeten hebben met de code. Als je die kwijt bent kan je hier je e-mailadres invullen. Je krijgt dan een nieuw mailtje. Quote Link to comment
+vadeko Posted April 22, 2014 Author Share Posted April 22, 2014 Je zou bij het updaten van 7 naar 8 een mail gehad moeten hebben met de code. Als je die kwijt bent kan je hier je e-mailadres invullen. Je krijgt dan een nieuw mailtje. Hoi, bedankt voor je reactie. De update mail kan ik niet terug vinden. Mijn mailadres is veranderd in de tussentijd. Dus heb ik nu via je link een mail gestuurd aan clyde met het verzoek om mijn code. Voorlopig even afwachten dus. Henk Quote Link to comment
+StefandD Posted April 23, 2014 Share Posted April 23, 2014 Het kan wel even duren. GSAK is een eenmansbedrijf en Clyde heeft in het ziekenhuis gelegen vanwege een val van zijn fiets. Uit het GSAK forum: While riding my bike on a downhill stretch I missed seeing something on the road and my front wheel hit it. This had me crashing to the bitumen where my femur pushed hard into my pelvis, breaking it in 3 places, and displacing the femur. I Also received a broken clavicle, and the customary collection of grazes and bruises. I was in traction for 5 days (very painful) and then they operated (The pelvis is being kept together with screws and a mettle plate). There were complications during the operation, but in the end the operation was deemed a success. I will be in rehab for 6 weeks then I can come home(but still not able to walk). I will then be able to slowly put weight on the leg and in 8-12 weeks and I should be fully recovered Still a bit painful to get in the position to use a computer and type, so my posts will generally be short and seldom. This should improve over the coming weeks and I should be back to normal in the forums and hopefully start doing some programming and making patches. Quote Link to comment
+vadeko Posted April 27, 2014 Author Share Posted April 27, 2014 (edited) Het kan wel even duren. GSAK is een eenmansbedrijf en Clyde heeft in het ziekenhuis gelegen vanwege een val van zijn fiets. Uit het GSAK forum: While riding my bike on a downhill stretch I missed seeing something on the road and my front wheel hit it. This had me crashing to the bitumen where my femur pushed hard into my pelvis, breaking it in 3 places, and displacing the femur. I Also received a broken clavicle, and the customary collection of grazes and bruises. I was in traction for 5 days (very painful) and then they operated (The pelvis is being kept together with screws and a mettle plate). There were complications during the operation, but in the end the operation was deemed a success. I will be in rehab for 6 weeks then I can come home(but still not able to walk). I will then be able to slowly put weight on the leg and in 8-12 weeks and I should be fully recovered Still a bit painful to get in the position to use a computer and type, so my posts will generally be short and seldom. This should improve over the coming weeks and I should be back to normal in the forums and hopefully start doing some programming and making patches. Dacht al bij mezelf, wat duurt het lang. Maar nu ik dit gelezen heb snap ik het. Is er nog een andere manier misschien. Ik heb na lang zoeken in oude mail nu wel 2 serienummers gevonden, maar de langste heeft 15 cijfers. Als ik deze invoer krijg ik een melding dat het een verouderd nummers is en dat alle serie nummers nu 16 cijfers hebben. Edited April 27, 2014 by vadeko Quote Link to comment
+StefandD Posted April 27, 2014 Share Posted April 27, 2014 Niet dat ik weet. Maar misschien is het handiger om deze vraag te stellen op het GSAK forum. Daar lezen mensen mee die Clyde actief ondersteunen en misschien wat voor je kunnen regelen. Ik hoop dat je Engels goed is, want het is een Engelstalig forum. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.