Jump to content

Help: pocket queries to GPS unit


Recommended Posts

Hey guys,

 

I just bought a PN-30 and a premium membership on geocaching.com. I would like to load all the geocaches in my area on to my GPS unit. I understand that the best way to do this is pocket queries. I've run them and have gotten the file in my email. My questions is:

 

How do I move the pocket query file in my email to my GPS? Also, why is it a .loc file instead of a .gpx as promised with my premium membership?

 

I downloaded Cache Register but that has proven useless. It gives me all kinds of error messages and I've given up trying to figure that dumb thing out. This is the biggest thing preventing me from really starting to enjoy geocaching, I'd really appreciate some help getting over this last hurdle. Thanks!

Link to comment

Cache Register is actually pretty good. There are some kinks in it but overall I find it works nicely. One thing is to make sure you are asking for GPX files in your PQ. Another is the make sure they are zipped. Cache Register doesn't seem to work with unzipped PQs.

 

If you have specific issues with Cache Register you go to the DeLorme website. Their forums are very helpful.

 

That said, if you are still not willing to work with Cache Register, GSAK can now send waypoints to the DeLorme units. Download GSAK and use it to send waypoints (you get a free trial, then have to pay $30 OTC for it. )

 

Moving to a more appropriate forum

Link to comment

Or you can just do this using the Topo USA 8 software that came with your 30:

 

1. Unzip your PQ so you have the raw GPX files

2. Plug in the PN40 (turn it on and press enter for "data exchange" mode) and open TOPO 8.

3. Drag and drop the GPX file onto the map screen of TOPO (If it's a large file be patient. it can take a little bit for a few hundred caches to load to TOPO)

4. Click on the Exchange dialog box at the top of the screen (PNXX icon)

5. Under "Waypoints" on left side of box you will see the file you just loaded to TOPO. Highlight it and click on the send button. After a few seconds (or longer depending on file size) you'll see the file under "waypoints" on the right side of the screen.

 

The caches should now be on your device.

Link to comment

Or you can just do this using the Topo USA 8 software that came with your 30:

 

1. Unzip your PQ so you have the raw GPX files

2. Plug in the PN40 (turn it on and press enter for "data exchange" mode) and open TOPO 8.

3. Drag and drop the GPX file onto the map screen of TOPO (If it's a large file be patient. it can take a little bit for a few hundred caches to load to TOPO)

4. Click on the Exchange dialog box at the top of the screen (PNXX icon)

5. Under "Waypoints" on left side of box you will see the file you just loaded to TOPO. Highlight it and click on the send button. After a few seconds (or longer depending on file size) you'll see the file under "waypoints" on the right side of the screen.

 

The caches should now be on your device.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...