Jump to content

How important is a screen protector on the Garmin 64s?


RStarrT

Recommended Posts

Saw a YouTube video about the hardness of the Garmin Oregon 600 series glass... but have seen nothing on the GPSMAP 64s. Is it the same hardness as the older 62s? Just wondering how important it would be to use a stick on screen protector with the 64s. Any thoughts?

Link to comment

Saw a YouTube video about the hardness of the Garmin Oregon 600 series glass... but have seen nothing on the GPSMAP 64s. Is it the same hardness as the older 62s? Just wondering how important it would be to use a stick on screen protector with the 64s. Any thoughts?

I guess it's better to be safe then sorry so it couldn't hurt.

 

I have never used one and never had a problem. The screen on my 64s looks like the same type screen as on my etrex 20. I have had the etrex longer and carried it a lot. I had it fly off my bike once on a down hill at 45+ mph and bounce down the road with no marks on the screen. I now use a safety lanyard.

Link to comment

I have seen pictures (on this forum, I think) of at least one 600 that had some pretty nasty screen scratches. Don't know about the GPSMap6x but I always keep my 60CSx and 64s covered.

You're probably thinking of my post from sometime last year (which I can't find at the moment). Here's what happened to my brand-new Oregon 650 when it brushed up against some rocks:

 

Oregon%2520650%2520scratches.jpg

 

I had to have the unit replaced; those scratches were actually cracks in the display. I ordered a screen protector about the same time I sent the unit in for replacement.

 

The displays are harder and more scratch-resistant than they were in earlier models, but I still recommend getting a screen protector.

 

--Larry

Link to comment

The Invisible Shield series of screen protectors are very good. They're a little more expensive than others, but worth it. They also come with a warranty, but you probably won't need it.

 

I purchased an ArmorSuit MilitaryShield screen protector from Amazon. As far as I can deterime, Zagg still doesn't make a screen protector cut specifically for the Garmin Oregon 600 series.

 

--Larry

Link to comment

The Invisible Shield series of screen protectors are very good. They're a little more expensive than others, but worth it. They also come with a warranty, but you probably won't need it.

 

Zagg still doesn't make a screen protector cut specifically for the Garmin Oregon 600 series.

 

That's... unfortunate...

 

Link to comment

I just upgraded to the 64s from a 62s. I had the 62s for almost 2 years and the screen was all scratched and gouged from rocks (I did find over 6000 caches with the thing). Just got my 64s this week and put a screen protector on it as soon as I took it out of the box. I won't go without again.

Link to comment

Bamboozle said: <<We've used GPS units for over 11 years and never needed screen protectors.....when not in our hand they're in a soft canvas belt holster.

I can't imagine what they would look like if they were dragged through the briars and brambles hanging from a lanyard....I guess like my pants >>

 

I always have my GPS hanging around my neck from a lanyard. It's handy to grab that way and I know myself well enough that without it being attached to my body I'm likely to leave it behind at a cache somewhere. Yes, it gets banged around a bit on the edges from rocks and such but briars don't seem to be a problem.

 

I also have a pen zip-tied to the same lanyard because that's one less thing to forget. For a while I had a Swiss Army knife on the same lanyard until I discovered it was making the GPS compass all hinky.

 

I have a good Leki hiking pole and on at least three occasions I've had to return to a cache to retrieve it after walking off and leaving it behind. Maybe I should attach that to me, too!

Link to comment

Just last night I installed an 'Armorsuit' screen protector on my 600, replacing a cheaper unit that had some digs in it (which may have saved the screen). Anyway, I like the Armorsuit protector. It installs differently than protectors I've used before. You spray a liquid (supplied in a special sprayer) on the both sides of the protector and your fingertips. You then 'float' the protector on the unit's screen until you have it centered, then use the supplied squeegee to push the liquid out. Then you let it dry overnight. Here's the instructions: http://www.armorsuit.com/screen-protector-cell-phone

 

This morning it looks great! No bubbles or dirt and I have to look close to see that there is a screen over the screen.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...